Products
Products
Myande pin mill is high-efficiency fine grinding equipment designed for extracting starch from corn, potatoes and beans. It can also be used in fruit juice and dry milling of starch and rice flour processing industries. It can simplify the process of starch production, improve the yield of starch and has significant economic benefits.
Learn moreMyande screw press and hydraulic screw press are specially designed mechanical dewatering equipment for starch processing and other food processing industries. They are especially effective in dewatering application of high moisture materials including corn germ and corn fiber in corn wet milling process for the purpose of or reducing energy consumption in subsequent drying section.
Learn moreThe degerming mill is mainly used to grind corn after steeping and works together with germ cyclone to separate corn germ from germ milk. To increase the recovery rate of corn germ, two-stage grinding and two-stage separation process is recommended. Adjustment of the gap between the moving disc and fixed disc reduces the breakage rate of corn germs. It can also be used for the coarse cracking of soaked soybean in Bean Products Factory.
Learn moreThe material liquid to be concentrated is pumped into the top of the heating tubes and flows downward along their walls as liquid film. In this process, the liquid film inside the tubes begins to boil and partially evaporate being heated from outside the tubes. The remaining liquid and vapor are further removed in subsequent separating machines. Reasonably determined material liquid flow prevents bottom section of tubes from getting excessively dry while ensuring optimal thickness of liquid film so that best heat exchange effect and minimum power consumption is achieved. Falling film evaporator is applicable to both cyclic evaporation and one-way evaporation processes. ApplicationsCapacity of single set can reach 200t/h.Suitable for heat sensitive materials.Suitable for materials with low concentration, low solid content and low scaling.
Learn moreAs raw material (liquid) circulates among heating and separation chambers at a high speed under the function of a circulating pump, it is heated up in the heating chamber and flashes in the separation chamber to achieve high-efficiency vapor-liquid separation. The flow rate in the heat exchange tube is high, which effectively improves the heat transfer efficiency. The evaporation process is conducted in the separator instead of heater. As a result, fouling caused by crystallization and precipitation of materials in the tubes is reduced. Forced circulation evaporator is especially suitable for materials that are easy to scale due to high viscosity, and can be used as a high-efficiency concentration device for multi-effect evaporation.
Learn moreThe raw material liquid and the circulating mother liquid are conveyed to the heater for heating through the circulating pump, and then goes into the FC crystallizer. Part of the crystal slurry is discharged from the cone bottom of the crystallizer, and the mother liquid that is not discharged is returned to the crystallizer by the circulating pump through the circulating pipe, and the continuous crystallization process is realized by the circulating pump. This kind of crystallizer with high capacity can enhance the heat transfer effect, and is effective for high-density and high-viscosity solutions. It is suitable for the evaporation crystallization treatment of high-salt wastewater with complex components and low requirements on the salt particle size.
Learn moreBy structural design, OSLO evaporation crystallizer separates supersaturation generation area and crystal growth area. Under the action of circulating mother liquor in the growth area, the fluidization effect of crystal size classification is formed, so that large-size crystal are enriched and discharged at the bottom of the crystallizer. This type of crystallizer can realize the screening of crystal size, and is suitable for materials with simple crystal composition, good fluidity, and high requirements for salt quality.
Learn moreMVR Evaporator (Mechanical Vapor Recompression) greatly reduces energy consumption of the evaporation system. Secondary steam generated by evaporation, after being compressed by a steam compressor so that its pressure, temperature and enthalpy increase, enters the heating chamber of the evaporation system as heat source. The process repeats itself during operation.
Learn moreMulti-effect evaporation is a mature and reliable evaporation process using secondary steam energy repeatedly. Its combination with different vapor-liquid separator and crystallizer can achieve concentration and crystallization process of different materials to meet various processing requirements.
Learn more